Living near the Atlantic means metal roofing components face constant salt air, humidity, and storm exposure. That’s why Harbor Roofing and Siding fabricates custom metal in Wilmington using coastal-grade materials designed to resist corrosion, high winds, and long-term wear common to homes near Wrightsville Beach, Carolina Beach, and the Cape Fear coast.
Wilmington NC Roofing and Siding Contractor – Harbor Roofing and Siding
Metal Fabricator in Wilmington, NC
When you live this close to the Atlantic Ocean, metal doesn't age the same way it does inland. Salt air works constantly—corroding flashing, attacking gutter seams, and breaking down roof components that would last decades in Raleigh or Charlotte. If you've owned a home near Wrightsville Beach, Carolina Beach, or anywhere along the Cape Fear coast for more than a few years, you've seen it firsthand. That's why choosing the right metal fabricator in Wilmington, NC isn't just about finding someone who can bend metal—it's about finding someone who understands what coastal conditions do to metal and knows how to build components that actually last. Harbor Roofing and Siding has been fabricating custom metal components for Wilmington-area homes since we opened our doors. We're located right here at 311 Judges Rd Suite 5F, Wilmington, NC 28405, and every piece of metal we fabricate is designed with one reality in mind: it's going to face salt spray, hurricane winds, relentless humidity, and UV exposure that tests materials in ways most of the country never experiences.
Our Services
Here’s what we do every week for homes around Wilmington, Ogden, Porters Neck, Monkey Junction, Wrightsville Beach, Carolina Beach, Hampstead, Leland, and all over Brunswick County.
Custom Metal Roofing
We fabricate metal roofing panels to fit Wilmington homes, not generic layouts. This works better for coastal wind, heavy rain, and rooflines you see near Wrightsville Beach and Riverlights.
Standing Seam Metal Roofs
Standing seam metal roofs hold up well in Wilmington’s storms and salt air. Fewer exposed fasteners means fewer leaks and less maintenance over time.
Metal Flashing Fabrication
We custom-bend flashing for chimneys, walls, and valleys so water runs off instead of sneaking in. This is especially helpful on older homes in Downtown Wilmington and near the river.
Aluminum Trim & Edge Metal
Aluminum trim and drip edge protect roof edges from rot and wind damage. Custom pieces last longer in coastal areas like Masonboro and Carolina Beach.
Why Choose Us
We know Wilmington roofs
Coastal weather hits different here. Between salt air, hot summers, and hurricane season, roofs in Wrightsville Beach, Carolina Beach, Ogden, and Porters Neck take more wear. We build and fix roofs for this exact climate, not some one-size plan.
Fast help after storms
When wind or rain rolls through Monkey Junction or Downtown, people don’t want to wait a week. We’re local, so we can get out quick, check the damage, and stop leaks before they spread.
Straight talk, no guess work
We’ll tell you if a repair makes sense or if it’s time for a new roof. No pushing. Just showing you what we see, with clear options and a fair price.
Clean jobs and respect for your home
We treat your place like it’s our own. We protect landscaping, keep the site neat, and clean up fully. Homeowners in Leland, Hampstead, and all over Wilmington call us back because the job feels easy from start to finish.
Get a Free Quote today
Storms and salt air don’t wait, and roof problems grow fast here in Wilmington. Call now for a free inspection and a clear plan before a small issue turns into a big one.
About Our Company
Harbor Roofing and Siding isn’t a big franchise or out-of-town contractor. We’re a local Wilmington team built on honesty, craftsmanship, and deep experience with coastal North Carolina weather. From Wrightsville Beach to Monkey Junction, from Porters Neck to Historic Downtown Wilmington, we repair and replace roofs that face something unique: salt air, high winds, humidity, and hurricanes.
We’ve helped homeowners around UNCW, Mayfaire, Greenfield Lake, Airlie Gardens, and Carolina Beach Boardwalk protect their homes with stronger materials, smarter installation practices, and storm-ready solutions designed for southeastern NC.
If you need a contractor who actually understands how Wilmington roofs fail — and how to protect them — you’re in the right place.
Why Coastal Metal Fabrication Requires Different Standards
What Metal Fabrication Means for Wilmington Homes
Metal fabrication is simple. We cut, bend, and shape metal to fit your roof, walls, and edges the right way. That includes flashing, drip edge, custom trim, and full standing seam metal roofs.
In Wilmington, off-the-shelf metal rarely fits right. Homes near Downtown Wilmington and along the Cape Fear River have odd rooflines, older framing, and details you don’t see in new builds. Custom metal fixes that. It fits the roof, not the other way around.
Why Custom Metal Matters More on the Coast
Coastal North Carolina is rough on metal. Homes near Masonboro or Carolina Beach see salt air every day. That salt eats cheap metal fast. Pre-made flashing from a big box store might look fine at install, then rust out in a few years.
Custom aluminum fabrication in Wilmington helps avoid that. We use thicker material, bend it to fit tight, and fasten it to handle wind and rain. The result lasts longer and looks cleaner.
Wind is another big deal. Homes near the Intracoastal Waterway face higher uplift pressure. Loose metal turns into noise at best and damage at worst. Custom bends and proper fastening keep everything locked down.
Standing Seam Metal Roofs in Wilmington
We do a lot of standing seam metal roofs in Wilmington, especially in places like Porters Neck and Riverlights. Homeowners there want clean lines and long life.
Standing seam works well here because:
Panels shed rain fast during heavy storms
Fewer exposed fasteners means fewer leaks
Metal holds up better in high wind zones
We fabricate trim and panels to match the roof pitch and layout. That matters on larger homes near College Road where roof sections change direction.
Client Testimonials
“Had Harbor Roofing out to replace my roof and upgrade it to IBHS Fortified with a full ice & water shield under the shingles. Their crew worked fast and completed my large / steep roof in 2 days. NCIUA insurance approved the work and sent the rebate check a few weeks later.”
“We have had Nate and his team replace our roof back in 2020 and it looks as great today as it did when installed. We were so impressed with their work, we had them do a metal roof on our barn in 2023. Our annual inspection shows everything is as it should be. We have our third project scheduled with Roger to put shingles on our “country house” and look forward to another successful installation. We appreciate your hard work and dedication!”
“Harbor Roofing and Siding was great to work with. We needed new siding and a new roof so it was nice to be able to work with just one company. Nate was very responsive and offered up some great ideas for our roof to fix our issues and give our house a great new look. Plus the cost for it all was less than than all the other quotes I received. We are very pleased with the work they did and love the new look of our house!”
Metal Flashing Fabrication Done Right
Most roof leaks start at flashing. Chimneys, walls, skylights, and valleys all rely on it. We do metal flashing fabrication for new roofs and repairs.
Older homes near Riverwalk often have brick chimneys and uneven siding lines. Factory flashing does not seal those well. We bend custom pieces so water runs away instead of finding gaps.
After storms, we see a lot of flashing pulled loose near Wrightsville Beach. Wind lifts edges. Water follows. Custom metal, bent to the roof and wall, fixes that problem.
Local Neighborhood Experience Matters
We don’t work off maps alone. We work these streets every week.
In Ogden, we see newer homes with builder-grade metal that wears out early.
In Monkey Junction, roofs are often lower pitch and need wider flashing.
In Downtown Wilmington, historic homes need careful metal work to match old lines.
Each area has its own quirks. A metal fabricator who knows Wilmington spots issues before they turn into leaks.
Coastal Weather and Metal Performance
Wilmington weather hits hard:
Heavy rain in summer
Hurricanes and tropical storms
High humidity year-round
Metal has to handle all of it. Thin metal warps. Poor coatings peel. Bad bends let water in.
We build metal to deal with this climate. Thicker gauges. Clean bends. Proper overlap. It’s not fancy talk. It’s what works after years on coastal roofs.
Codes, Permits, and Inspections in New Hanover County
Metal work here follows rules. New Hanover County permitting applies to roofing and major metal installs. Wind ratings matter more the closer you get to the coast.
Inspections often check:
Fastener spacing
Edge metal attachment
Flashing installation
Homes inland can sometimes get by with lighter setups. Coastal homes cannot. We build metal to pass inspection the first time, whether the job is near UNCW or closer to the beach.
Metal Fabrication for Repairs and Add-Ons
Not every job is a full roof. A lot of calls come from small problems:
Rusted drip edge
Bent valley metal
Leaking wall flashing
Riverfront homes along the Cape Fear River see metal wear faster due to moisture. We fabricate replacement pieces to match what’s already there, so repairs blend in instead of standing out.
Why Pre-Made Metal Fails Faster Here
Pre-made metal is cut for average roofs. Wilmington roofs are not average.
Salt air, wind, and rain find weak spots fast. Gaps grow. Fasteners loosen. Rust shows up early.
Custom metal costs a bit more up front, but it saves money over time. Fewer repairs. Less water damage. Less noise in storms.
Working With Homeowners and Builders
Builders around Riverlights and Porters Neck call us for clean metal details. Homeowners near Carolina Beach call when storms expose weak spots.
We talk through options in plain language. No sales pitch. Just what works for the house and location.
Metal Fabricator in Wilmington NC You Can Rely On
If you need a metal fabricator in Wilmington NC, this work should be done by someone who knows the area, the weather, and the rules. Metal that works inland won’t always work here.
From custom metal roofing in Wilmington NC to flashing and trim, local experience shows in the final result. Tight fits. Clean lines. Metal that holds up when the next storm rolls in.
If your home is near the water, downtown, or anywhere in between, custom metal makes a real difference.
Wilmington’s Trusted Roofing & Siding Crew — Get a Free Inspection Today
Storms and salt air don’t wait, and roof problems grow fast here in Wilmington. Call now for a free inspection and a clear plan before a small issue turns into a big one.
Trusted